I am out of the DG5 emulator boards. Given that the last few boards came in slowly, I am not planning on another board production run at this point. If enough folks want one (make a post below), I’ll look into another run of boards. Thanks to all who have purchased, and I hope you’re enjoying your Arduino AD5 emulator!
7/31/15 – I have received a lot of interest over the past few months, so I have put in a request for pricing on another order of boards – will let folks now if I pull the trigger! Thanks for your patience!
Steve
KV6O
Hello, I’m restoring a TS-520, and just today found your blog! I wish I’d found it a few weeks ago, when you still had boards. Any chance of getting some more? Or if not, do you have a link to where I could get one made from your design files?
Thanks for sharing this project!
Paul KE3LR
I am interested in the DG5 Emulator board if you start production again.
I would like to buy one
I AM INTERESTED IN PURCHASING A DG 5 BOARD. Please let me know if you are going to have another run made. Jack Buzzard KK6OSY
Really would like get one maybe to of the PCB boards.
Thanks,
Dave
W4WLC
I would like to buy one DG5 emulator board when (if) they next become available. Thank you for your work on this project.
73,
John
John, trying to find you. thought id tell you were 58 in SD this afternoon with you eight watts, went down 3kc and gave you a long call but no joy. the other gentleman had the freq and was already being called when you signed. couldnt find your info on QRZ.com or Facebook..
Gary
WD0BIA
John –
That’s strange… I wasn’t on the air on 3/13!
Steve
KV6O
Hi i have a ts520 and would like a DG5 emulator if they become available again as well.
Thanks
-Jim KB1DTF
I’ll buy one!
I’m in for one if they become available. Thanks!
Mike
K1MJD
Hi
I would also like to order a board.
Thanks
Hi,
I would like to buy a DG5 board. Do you have any in stock at the moment?
Cheers,
Errol Walker
I don’t, But I’ll try to make an order given the interest at this point…
I put in an e-mail to the US supplier I have been using to get a price on another 30 or so boards – will follow up here!
Steve
KV6O
Good, keep us updated and thanks. Jack
New DG5 boards are IN! I am replying here hoping that if folks subscribed to this post, they will get an update. I’ll also try to reach out to everyone who expressed interest in the board. They can be ordered from the project page at https://www.kv6o.com/wordpress/projects/kenwood-dg5-emulator/
Steve
KV6O